Comparing Products



Product Summary

Always at the Ready
ProTalk XLS TK-3230DX is intuitive to the user. This easy-to-use, UHF portable two-way radio is compact, lightweight, and comfortable to use. The radio blends seamlessly in the business work environment.

COMPACT, LIGHTWEIGHT DESIGN & OPERATING EASE
Compact enough to carry anywhere with ease, the TK-3230DX has a distinctively ergonomic form that's easy to hold and operate. It weighs a mere 5.5oz (155 g) with the rechargeable Li-ion battery and control buttons, which are simple to use with PTT, MON, MENU, CAL, UP and DOWN operations.

1.5 WATTS TRANSMIT POWER & RANGE OF UP TO 5 MILES
The TK-3230DX offers 1.5 watts of power to enable direct radio-to-radio communication

Talk Range

Open areas without obstructions Up to 5 miles (8 km)
Residential areas (near buildings) Up to 1.5 miles (2.4 km)
In steel and/or concrete reinforced buildings Up to 225,00
In high-rise buildings Up to 17 floors

ALL-IN-ONE PACKAGE
The TK-3230DX is ready for immediate use after purchase. It comes with essential accessories including a fast
charger, 2,000 mAh Li-ion battery and a belt clip.

MODIFIABLE 6 PRESET CHANNELS FROM 99 PRE-STORED FREQUENCIES
Users can modify each of 6 preset channels to any of the 99 pre-stored frequencies.

Always at the Ready
ProTalk XLS TK-3230DX is intuitive to the user. This easy-to-use, UHF portable two-way radio is compact, lightweight, and comfortable to use. The radio blends seamlessly in the business work environment.

39-QT/168-DQT CODED SQUELCH
Sub-audible QT tone & DQT digital codes mute undesired voice traffic audio and segregate user groups on shared frequencies or radio system. The user can pick any of the pre-stored channel settings.

SELCALL - FleetSync® PTT ID AND CALLER ID DISPLAY
KENWOOD's FleetSync digital signaling system includes PTT ID digital Alphanumeric Number Identification (ANI) for instant radio call identification. FleetSync also includes caller ID display and selective calling (Individual call, Group call and Broadcast call). Users can also set the alert tone (1-10, Off) for Individual call and Group/Broadcast call.

4-DIGIT 7-SEGMENT LCD WITH BACKLIGHTING
The large 4-digit 7-segment display makes it easy to check on both channel and signaling information. There is also a 3-level icon in the LCD to indicate how much battery power is left.

SELECTABLE POWER ON TONE
The radio is set to output a tone when the power is turned on. The user can select from 3 selection tones.

CHANNEL SCAN
Channel scanning can be used to monitor multiple channels without searching manually.

OTHER FEATURES

  • MIL-STD 810 C, D, E, F and G (refer to the chart on back page)
  • Built-in VOX
  • Built-in Privacy Talk
  • Key Lock/Super Lock
  • Compander
  • Battery Saver
  • 10-call Alert Tone
  • Busy Channel Locko

Optional Accessories




Product Summary

The NX-P500 is a small, light and powerful UHF digital transceiver with mixed mode capability allowing for digital and analog communications for interoperability. This promotes a simple method for transitioning to digital operations at your own pace. Ideal for business, retail, hospitality, education and the restaurant industry. Put your employees in touch with each other instantly and raise the level of communication for better service. A stronger collaboration through communication increases team work quality.

Key Features
  • Dual Mode NXDN Digital & FM Analog
  • UHF 2 Watt Transmit Power
  • Small (1.97" W x 3.70" H x 1.07" D) & Lightweight (5.6 oz)
  • Li-Ion battery with over 15 Hours (w/Save On) Talk Time (5/5/90 duty cycle)
  • 750 mW Loud Speaker
  • High Brightness LCD Display
  • 7-color LED Indicator
  • IP67 Dust & Immersion / MIL-STD-810 C/D/E/F/G
  • 6 Channel Operation (Factory pre-set)
  • 99 User-Programmable Memory Bank Frequencies
  • Digital/Analog Mixed Mode Operation
  • Individual Call / Group Call
  • Second PTT
  • Channel Scan
  • NXDN Digital Scrambler
  • Repeater Mode
  • Wireless Cloning Mode
  • Key Lock/Super Lock
  • User Programmable QT (45) and DQT (174) Signaling
  • Compander
  • FleetSync®
  • LCD Battery Meter & Low Battery Alert
  • VOX (Voice-activated transmit)
  • Time Out Timer
  • Free Programming Software (KPG-D5)
  • FCC License required